The Foolproof Method: How to Easily Put Fishing Line on a Reel

How to Put Fishing Line on a Reel: A Step-by-Step Guide


Fishing is an enjoyable and popular pastime, but as any angler knows, properly setting up your fishing gear is crucial for success. One of the essential steps in preparing your fishing reel is correctly spooling it with fishing line. In this comprehensive guide, we will walk you through the step-by-step process of putting fishing line on a reel.

Gather Your Materials

Before starting, make sure you have all the necessary materials at hand:

  • A suitable fishing reel – choose one that matches your specific needs and preferences.
  • Fresh monofilament or braided fishing line – select an appropriate pound test strength depending on your target fish species.
  • A pair of scissors or clippers – to cut the fishing line during spooling.

Prepare Your Reel

Follow these steps to prepare your reel before adding new line:

Clean Your Reel and Remove Old Line (if applicable)

If there is old line remaining on your reel, unwind it completely. Then clean any dirt or debris from the spool using a soft cloth dampened with water or mild soap solution.

Select Proper Backing (optional)

If you are planning to use braided line or require additional capacity, consider adding backing to prevent slippage. Simply attach a few yards of monofilament as backing directly onto the spool before proceeding further.

Tie Arbor Knot

To secure your mainline properly, tie an arbor knot around the reel’s arbor — ensuring a tight and secure connection between the reel and line.

Spooling Your Reel with Fishing Line

Now that your reel is prepped, it’s time to spool it with fresh fishing line. Follow these steps:

Thread the Line Through Rod Guides

Carefully thread the end of the fishing line through each rod guide starting from the one closest to your reel’s spool. This will ensure a smooth and even distribution of line across all rod guides during casting.

Snap or Tie Overhand Knot on Spool

To prevent slippage, securely attach the fishing line onto your reel’s spool by either snapping it into place (if equipped) or tying an overhand knot around the spool arbor.

Add Tension to Line

Hold onto your fishing rod using moderate tension while you start reeling in. This helps prevent loose wraps and ensures proper alignment as you wind on additional line.

Spool Slowly and Evenly

Begin turning the handle of your reel steadily, allowing for a slow and consistent winding motion. Maintain pressure on both sides of the line as you fill up the spool evenly without any overlaps or gaps.

TIP: Use Gloves or Towel for Grip

If necessary, use gloves or wrap a towel around larger diameter lines to get a better grip, especially when dealing with heavy braided lines.

Finishing Touches

Cut Excess Line

When finished spooling, leave about 1/8 inch of slack between your new fishing line and outer edge of your reel’s spools lip. Cut off any excess using scissors or clippers, ensuring a neat and clean finish.

Test Your Line

Before heading out on your fishing adventure, carefully test your line by pulling it gently to ensure it is correctly spooled. This will help detect any twists or tangles that may cause frustration later on.

In Conclusion

Congratulations! You have successfully learned how to put fishing line on a reel. By following these step-by-step instructions, you can guarantee that your reel is properly spooled with fresh line for an enjoyable and successful day of angling. Remember, taking the time to prepare your gear thoroughly will greatly enhance your overall fishing experience.