Level Up Your Fishing Reel: A Comprehensive Guide on Adding New Line

How to Add Line to Your Fishing Reel: A Step-by-Step Guide

Fishing is a popular recreational activity enjoyed by people of all ages. Whether you are a seasoned angler or just starting out, properly adding line to your fishing reel is essential for optimal performance and success on the water. In this comprehensive guide, we will walk you through the steps required to add line to your fishing reel like a pro.

Gather Your Tools and Materials

Before getting started, it’s important to gather all the necessary tools and materials. Here’s what you’ll need:

  • A new fishing line spool
  • Your fishing reel
  • A pair of scissors or knife for cutting the line
  • Safety gloves (optional)

Prepare Your Reel and Line Spool

Prior to adding new line, make sure your fishing reel is clean and in good working condition. Also, check if any old or damaged line needs replacing.

  1. If needed, remove any old line from your reel by unwinding it until nothing remains.
  2. Next, prepare your fishing line spool. Locate the hole in its center where you can slide your reel’s spindle through.

Attach the Line Spool To Your Reel

  1. To secure the spool tightly onto your rod handle or rotor assembly (depending on whether it’s a spinning or baitcasting reel), follow these instructions:

  1. If using a spinning reel:

    i) Open up the bail arm.

    ii) Slide one end of the fishing line through one of the rod’s guides closest to the reel.

    iii) Tie a simple overhand knot around the spool, leaving a short tag end for later adjustments.
  2. If using a baitcasting reel:

    i) Remove any side plates or covers necessary to access your reel’s spool.

    ii) Thread your fishing line through the level wind guide and tie an overhand knot as before.

Start Winding Your Line

  1. You are now ready to begin winding new line onto your fishing reel. Follow these steps:

  1. If you have someone assisting you, ask them to hold tension on the line while you operate the reel. Alternatively, place something with weight on top of your spool (e.g., a book or tackle box).
  2. Crank the handle slowly and steadily in order to maintain even line distribution across your spool.
  3. < li>Avoid overfilling or underfilling your reel; aim for it to be about 1/8 inch below its maximum capacity.

    < li>Note: Some anglers prefer adding backing before attaching their mainline. This is especially common when using braided lines on spinning reels that have large capacities but require less overall line length.

    Finishing Touches

    1. Your new fishing line is successfully loaded onto your reel! Here are some final steps:

        Trim off any excess tag end left from tying knots earlier using scissors or a knife.

        Check if there are any twists or tangles along the line.

        Close the bail arm (for spinning reels) or reassemble any side plates/ covers that were removed (for baitcasting reels).

        Give your reel a few gentle test casts to ensure everything is functioning smoothly.

        Congratulations! You have now learned how to add line to your fishing reel like a pro. By following these step-by-step instructions, you can easily maintain and optimize the performance of your gear, ultimately enhancing your overall fishing experience. So grab your rod, cast out with confidence, and enjoy a successful day on the water!